Metal Forming Tools

This S1 Deluxe® set includes 8 steel punches with hardened and ground heads, ranging from 5mm - 27mm in diameter. Wooden storage stand included. Ideal for metal shaping. Sizes are 5mm, 8mm, 11mm, 14mm, 17mm, 19mm, 24mm and 27mm. Learn More

This BULLONGÈ® PRO8 POLISHED set includes 8 completely polished steel punches with hardened and ground heads, ranging from 5mm - 27mm in diameter. Wooden storage stand included. Ideal for metal shaping. Sizes are 5mm, 8mm, 11mm, 14mm, 17mm, 19mm, 24mm and 27mm. Learn More

Doming punch set of 12 on wooden stand. Punches diameter: 2,3 - 3,5 - 4,3 - 5,1 - 5,9 - 6,7 - 7,5 - 8,3 - 9,1 - 9,9 - 10,7 and 11,5mm. Weight 0,6kg. Learn More

S1 Deluxe® mini doming block set (1x1x1 inch) incl. 12 punches on wooden stand. Punches diameter: 2,3 - 3,5 - 4,3 - 5,1 - 5,9 - 6,7 - 7,5 - 8,3 - 9,1 - 9,9 - 10,7 and 11,5 mm. Weight 0,7kg. Learn More

Doming punch set of 24 on wooden stand and add. doming block. Punches come in the following sizes: (the first number is the size in inches followed by the size in mm) 0.09" 2.3mm, 0.14" 3.5mm, 0.17" 4.3mm, 0.20" 5.1mm, 0.23" 5.9mm, 0.26" 6.7mm, 0.30" 7.5mm, 0.33" 8.3mm, 0.36" 9.1mm, 0.39" 9.9mm, 0.42"-10.7mm, 0.45"-11.5mm, 0.48"-12.3mm, 0.51"-13mm, 0.54"-13.8mm, 0.57"-14.6mm, 0.61"-15.4mm, m0.64"-16.2mm, 0.67"-17mm, 0.73"-18.6mm, 0.80"-20.2mm, 0.86"-21.8mm, 0.93"-23.5mm and 0.98"-25mm. Weight 3600g. Learn More

Doming punch set of 36 on wooden stand. Punches diameter: 3,5 - 3,8 - 4,4 - 5,0 - 5,5 - 6,4 - 6,7 - 7,0 - 7,3 - 8,0 - 8,5 - 9,0 - 9,5 - 10,0 - 10,5 - 11,0 - 11,5 - 12,0 - 12,5 - 13,0 - 13,5 - 13,8 - 14,3 - 14,8 - 16,0 - 16,5 - 17,2 - 18,3 - 18,8 - 19,5 - 20,5 - 21,3 - 22,2 - 23,0 - 24,3 and 25,3mm. Weight: 5500g. Learn More

A doming block and punch set S1 Deluxe® with 37 pieces. Doming block has 36 punches and 1 large doming block all neatly arranged on a wooden base. The wooden base has both the number and size in mm of the punch. The punches have the corresponding numbers stamped into them for ease of use and location. The punch face sizes are: 3.5, 4, 4.5, 5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13, 13.5, 14, 14.7, 15.4, 16.2, 17, 17.8, 18.6, 19.4, 20.2, 21, 21.8, 22.6, 23.4, 24.2 and 25mm Learn More

Dapping punch and block set BULLONGÈ DeformeX18 is ideal for doming soft metals. This set includes 18 steel dapping punches with diameter from 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm in diameter, and dapping block cube with 18 half-sphere depressions; and a hardwood stand to hold all the pieces. Each dapping punch has its size engraved on it. All high quality punches are made of polished tool hardened steel and measure 14 cm long. Wooden block is etched with measurement labels for each punch in millimeters. Dimensions of dapping block: 80mm x 80mm x 22mm. Learn More

This 40 piece S1 Deluxe FormeXX40 Set incl. 36 different sizes of dapping punch, a cube shaped dapping block with large sizes, a flat dapping block with small and medium sizes, a flat forming block with U-shaped grooves, and a swage block with U-shaped, V-shaped, and flat wire grooves. The wood base plate has slots for each piece, and is etched with millimeter sizes and numbers for the dapping punches. Punch sizes in millimeters: 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13, 13.5, 14, 14.7, 15.4, 16.2, 17, 17.8, 18.6, 19.4, 20.2, 21, 21.8, 22.6, 23.4, 24.2, 25. Dapping cube: 2.5 inches. Impression sizes from 5 mm to 45 mm. Flat dapping block: 5 x 2.5 x 1 inches. Impression sizes in millimeters: 26, 25, 23.5, 22.75, 21.7, 20.25, 19.35, 18.6, 17.6, 16.5, 15.6, 15, 13.4, 12.8, 12, 10.5, 9.5, 8.5, 7.65, 6.6, 5.3, 4.52, 4.25, 3.5, 3.25, 2.7. Swage block: 2.5 x 2.5 x 2 inches. Flat groove block: 8 x 1.5 x .75 inches. Groove sizes on flat groove block in millimeters: 5, 7.25, 8.5, 10.3, 11.4, 13.2, 15, 16.65, 18.5, 19.5. Learn More

This 43 piece S1 Deluxe FormeXX43 forming set contains 21 round dapping punches, 1 oval dapping punch, 15 round and square forming punches, 1 V-shaped forming punch, 1 dapping block, 1 swage block (with round, squared, and v-shaped dies), 1 combination dapping/swage block with round and oval dapping dies, 1 mini anvil, and a sturdy wooden base. Measurements: Dapping punches in mm: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 17, 19, 21, 24, 28, 30, 33, 38, 43. Round forming punches in mm: - 2, 3, 5, 7, 10, 11, 15, 18, 21, 24. Square dapping punches in mm: 2, 3, 4, 5, 6. Dapping block in inches: 2.5 x 2.5 x 2.5. Dapping block dies in mm: 4 to 45. Swage block in inches: 2.5 x 2.5 x 2. Dapping / swage block in inches: 8 x 1.5 x 1.5. Dapping dies on dapping/swage block in mm: 3.75 to 20. Oval dapping dies on dapping / swage block in mm: 11 x 18 to 15 x 25. Learn More

S1 Deluxe FormeXX55, a full set of forming items to dap, dome, swage metal. Small anvil, along with two styles of swage blocks and various stakes for curved and cornered shapes for items like tubes and bezel shapes. Doming punches for convex and concave shapes to fit a doming block. All kept neat and tidy in a wooden block. Polished Steel. Learn More

3 S1 Deluxe extra large polished doming punches and a steel block with matching depressions. The wooden storage stand has the 3 different punch size markings etched on which are 40mm, 45mm and 50mm. The steel block contains three half-spheres / domes 42, 47 and 52 mm. The reverse side of the steel block can be used as an anvil plate. Weight 5,9 kg. Learn More

6 S1 Deluxe extra large polished doming punches and a steel dapping block with matching depressions. The wooden storage stand has the 6 different punch size markings etched on which are 32mm, 38mm, 44mm, 50mm, 54mm and 63mm. The steel block 75 x 75 x 75mm contains six half-spheres / domes. Weight 9 kg. Learn More

6 King-Size steel dapping punches and 3 double sided cupola dies BULLONGÈ SYLEFORM-MEGA9. Sizes of the polished big King-Size Punch faces: 32 mm, 38 mm, 45 mm, 50 mm and 63 mm. Weight approx. 7kg. Learn More

Great product from BULLONGÈ: set of 5 universal forming stakes. All stakes measure 22,5 cm length and are made of hardened steel. These tools allow you to form both synclastic / anticlastic / curved shapes. The hexagonal shape of the body center of each forming tool can be gripped by a bench vise. Weight: 5,5 kg. Learn More

Oval dapping die punch set S1 Deluxe OV4 with 4 punches and block with 16 oval depressions. For forming oval shapes in a wide range of sizes. With this set you can make oval shapes ranging from (ca.) 8 x 10mm to 21 x 30mm. The punches and block are made of hardened steel, comes with a wooden base. Please note that you will only receive one block with 16 oval depressions and the images are for display purposes only to show you the 4 different sides it has. Side 1: 11 x 9 mm - 12 x 9.5 mm - 13 x 10 mm - 14 x 11 mm - 15 x 12 mm, Side 2: 16.5 x 12.5 mm - 18 x 13.5 mm - 19 x 13.5 mm - 19.5 x 14.5 mm, Side 3: 23 x 17 mm - 24 x 17 mm - 25 x 18 mm - 26 x 18.5 mm, Side 4: 27 mm x 19.5 mm - 28 mm x 20 mm - 30 mm x 21 mm. Weight: 4,5kg. Learn More

This BULLONGÈ ROV9 round and oval dapping set is a fantastic addition to your workbench. It features; 1 flat dapping block 165mm x 50mm x 25mm with 8 half round and 5 oval concave profiles. 8 varying punches: 3mm, 6mm, 9mm, 12mm, 15mm, 18mm, 21mm and 24mm and additional 1 oval punch, all corresponding to the matching profile. The blocks and the punches are steel and a wooden storage stand is included. This set is ideal to use when working with soft metals such as; gold, silver, copper, brass, and aluminum. Learn More

Bangle forming die set BULLONGÈ BAN10. You will receive 10x concave and convex shaped precisely ground, hardened, and highly polished steel dies. All dies measure 50/60mm in height. Diameter of each of the 10 dies: 27mm, 30mm, 34mm, 2x dies measuring 40mm, 46mm, 48mm, 56mm, 2x dies measuring 60mm. This set also features a metal die holder that can be mounted securely in a bench vice enabling you to exchange between dies easily by sliding them on and off the metal die holder. It also comes with a wooden holder to ensuring the dies and metal die holder remain organised. Weight 8kg. Learn More

The 50mm x 60mm swage or forming block S1 Deluxe FormeXX-Uni18 has half-round, v shape and rectangular grooves cut into the sides to be used with the ten different round punches, and six different square or corner shaped punches. The wood block measures 11,5 x 17,5 cm and has a marked spot for all the tools. Punches supplied: 2mm x 2mm square, 4mm x 4mm square, 5mm x 5mm square, 6mm x 6mm square, large square with 45 degree edge, round: 2, 3, 5, 7, 10, 11, 15, 18, 21 and 24mm. Weight: 3,15 kg. Learn More

BULLONGÈ DC5 are a useful disc cutter tool for any jeweller, watchmaker etc.. They punch discs from sheet metal (gold, silver etc.), but can also be used to punch holes in a number of different materials including metal, paper, card and leather. This 5 size Disc Cutting Set will cut a maximum of 1.00mm sheet*, and contains the following cutter diameters: 12mm, 15mm, 19mm, 22mm and 25mm. Remove all cutters before use. To operate, insert your metal sheet into centre slit under the circle required. Insert the corresponding cutter and strike with a hammer. The metal disc will be stamped from the metal sheet and can be found on the underside of the tool. The disc stamped will be the same diameter as the cutter used. Made from steel. *Please note, steel sheet should be annealed before stamping, and should be no greater than 0.7mm thick. Learn More

BULLONGÈ DC14 are a useful disc cutter tool for any jeweller, watchmaker etc.. They punch discs from sheet metal (gold, silver etc.), but can also be used to punch holes in a number of different materials including metal, paper, card and leather. This 14 size Disc Cutting Set will cut a maximum of 1.00mm sheet*, and contains the following cutter diameters: 3mm, 4.5mm, 5mm, 6mm, 7mm, 7.5mm, 8mm, 8.5mm, 10mm, 11mm, 12mm, 13mm, 14mm and 16mm. Remove all cutters before use. To operate, insert your metal sheet into centre slit under the circle required. Insert the corresponding cutter and strike with a hammer. The metal disc will be stamped from the metal sheet and can be found on the underside of the tool. The disc stamped will be the same diameter as the cutter used. Made from steel. *Please note, steel sheet should be annealed before stamping, and should be no greater than 0.7mm thick. Learn More

This is a bronze made doming block, 29 various sized half holes (smooth finish) for shaping and working metal. Dimensions: 25,4 x 25,4 x 25,4 mm. Learn More

This is a bronze made doming block, 57 various sized half holes (smooth finish) from 3,3mm up to 27mm for shaping and working metal. Learn More

Solid brass machined blockwith 69 Half-Spheres (smooth finish) for shaping and working metal. Size 2.5" x 2.5" x 2.5" (63,5 x 63,5 x 63,5 mm). Different size round shapes on all sides from 3 to 42mm diameter. Learn More

Steel dapping block is approximately 5,1 x 5,1 cm. Depression sizes: 35, 31, 28, 25, 21, 20, 19, 17, 15, 14, 12, 11, 9, 8, 6, 5, and 2x 3mm. Weight ca.: 0,75 kg. Learn More

This BULLONGÉ COMBI FANCY design dapping block features triangular, square, half-round and round grooves with round dapping holes. The shape combinations are endless with this design block. Jewelry makers, watchmaker and craftspeople will love this design block. 15 half spheres : 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 20 and 25 mm. 6 rectangular grooves range : 2, 2.5, 3, 3.5, 4.5 and 5.5mm. 6 V-Shape grooves range : 2, 3, 4, 5, 6 and 7 mm. Half round grooves range : 2, 3, 4, 5 and 6mm. Dimensions: 50 x 50 x 50 mm. Learn More

Swage block / steel grooving block. 10 x half-round grooves of 3mm - 25mm, Length: 2 x 60mm and 6 x 50mm. 7 x triangular grooves (V) of 3mm - 9mm, length: 2 x 60mm and 5 x 50mm. 5 x normal grooves 3.0mm - 7mm, length: 50mm. Made of hardened tool steel. Learn More

S1 Deluxe FlaXX27: this flat dapping block has 27 half-sphere depressions from 2.0 mm - 25mm in diameter. This hardened steel block is ideal for doming soft metals with the use of dapping punches (not included). It can also be turned over and used as a bench block. Overall measures 127 x 64 x 25 mm. Weight: 1,3 kg. Learn More

S1 Deluxe FormeXX-Vario1 is a combination of half dome and half tube profiles in various sizes. With the appropriate dapping tool and rod sizes form these half shapes into full ball or tube with soldering or glueing. Consisting 17 rounds, 5 oval, 3 V shapes and 20 half round glooves for dapping, jewellery bending and shaping. Dimensions ca. 205 x 38 x 38mm. Learn More

Wood dapping block punch set DomeXX-3. The dapping block provides six different curved surfaces to shape a variety of disc sizes. Wood will not scratch or mar the surface of precious metals, and provides a nice, even curvature to pendants and more intricate designs. Easy to use: all you need is a dapping punch and block, a rubber mallet, and a non-slip surface. Includes wood dapping block and 2 wood dapping punches (11,5cm). Dapping Block Dimensions: 5,7 x 5,7 x 5,7 cm. Wood block depressions range from about 27, 30, 33, 37, 44 and 46 mm. Weight: 145g. Learn More

Large wooden dapping block BULLONGÈ DAP12 for forming metal sheets when jewellery or watch making. Includes two large domes of 120mm and 130mm diameter, both domes approx. 20mm depth. The sides of the dapping block have 4 x half-round grooves of sizes: 8mm, 11mm, 13mm, and 15mm. Overall block size: 170mm x 170mm x 70mm. Use this dapping block with a doming punch and a hammer to form your shape (not included). Learn More

S1 Deluxe DomeXX-10 hardwood dapping block and 10 wooden punches. Beautifully crafted, reversible hardwood dapping block has ten depressions ranging in diameter from 17 to 61 mm. Ten hardwood punches in the diameters 15.5, 19, 25 28.5, 32, 36, 40, 44.5, 50 and 60 mm are included. Block measures 18,3 x 10 x 4x5 cm. Weight: 1,3 kg. Learn More

S1 Deluxe DomeXX-16, doming dapping wooden swage block and 8 round punches: 25mm, 21mm, 18mm, 15mm, 11mm, 10mm, 7mm, 5mm. 5 rectangular punches: 7x12, 6x12, 5x12, 4x12, 3x12. 1 piece 45 degree angle. 1 x 60 x 60mm swage block. Weight: 0,75kg. Learn More

S1 Deluxe DomeXX-Plus8 hardwood dapping block and 7 big wooden punches. Beautifully crafted, reversible hardwood dapping block has diferent depressions. Seven hardwood punches in the diameters 25mm - 32mm - 37mm - 41mm - 45mm - 51mm and 63 mm are included. Block measures 73mm x 73mm. Weight: 1,6 kg. Learn More

S1 Deluxe FormeXX-Del8. This 8 piece set includes punches that range from 6 to 28 mm. Made of lightweight but strong and durable Delrin. The softer material will not mar the metal while still achieving the desired results. They may be used with a hammer. Punch sizes: 6mm, 9mm, 12mm, 15mm, 18mm, 20mm, 24mm and 28mm. Learn More

This nylon forming hammer BULLONGÈ DAP5 with round and cone shaped edges, this dead blow mallet has been designed and made of Delrin and is used to shape sheet metal for anticlastic or synclastic metal forming. The hammer features one large, round face that features a curve and one smaller and thinner rounded face, the overall length measures 255 mm and the head length measures 75 mm (head dia. aprox 25 mm). Weights aprox. 60g. The handle has been made from solid wood. Learn More

Quality constructed 450g (1 lb.) brass plated head hammer BULLONGÈ DAP1 is perfect for hammering ferrous or non-ferrous metals and is excellent for stamping and dapping and other related jobs. Smooth brass head is secured on metal handle with comfortable grips. Hammer length 255mm. Head length 67mm, diameter at the end: 25mm. Learn More

This BULLONGÈ MA70 mini anvil is a great tool for detailed metal forming work. The base help ensure it remains secure on the table, and it has enough weight to prevent being knocked down if the table gets bumped. Wires can be strung through the pritchel hole to make working on them easier. The stainless steel build ensures that you'll be able to use this anvil for years to come. Overall height 70mm, width 125mm. A nice miniature anvil for many work on the workbench, ideal for watchmakers and jewelers. Learn More

This small round base anvil has one flat and one round horn and is made from forged steel, with a hole for riveting. The different shaped horns, plus the strinking anvil between the horns, makes this a must for all professional watchmakers and jewellers to make jobs easier. The BULLONGÈ BL70 mini double horn anvil measures 68mm x 107mm. Learn More

BULLONGÈ MHA2 mini double horn anvil has one flat tapered horn and one round tapered horn. It is perfect for forming, flattening, shaping and riveting, has a hole on top for riveting or bending wires. Made of forged steel, machined case hardened and a high polished finish. This miniature anvil can be used jewelers, bead and wire working, watchmakers and metal-smiting work. Anvil can be turn upside down and used for forming round forms and shapes. Dimensions 108mm x 30mm x 45mm (l x w x h). Weight ca. 550g. Learn More

This S1 DELUXE bench block set comes with a steel bench block, a nylon bench block, and a rubber base that can house either of them. The steel bench block is made of high quality tool steel. It is a versatile bench block, and can be used for forming, riveting, work-hardening wire, planishing flat elements, stamping, and more. The nylon bench block can be used for more delicate purposes like straightening wire and sheet, flattening wire, or working with PMC. It will hold up to hammer strikes, but it will not mark or scratch your metal. The rubber base absorbs the vibration from hammer strikes and makes hammering more efficient as well as quieter. Steel and nylon blocks measure 7.6 cm in diameter and 2 cm thick. Rubber block measures 10 cm in diameter and 3.2 cm thick and snuggly houses either block. Overall weighs ca. 1kg. Learn More

Hardened steel letter punches are excellent for marking tool bodies or keys. Includes 27 punches, letters A-Z plus the ampersand. Learn More