• de
  • en
  • fr
  • es
  • it
  • po

Module

Watch Winders kits, spare parts and accessories

38 Item(s)

per page

Set Descending Direction
  1. thumbnail

    New watch winder modules MTE WTM SILENT

    MTE watch winder modules WTM, made in germany - The module is suitable for individual or multiple use, preferred installation position 12° inclination backwards reversing mode or optional left / right run, duration of one cycle 72 seconds (rotation and break time), power supply via battery compartment or mains-plug transformer (adapter), as from 5 stations we recommend our central control, here each station can be programmed individually, low current consumption, very low-noise run. Dimensions: h 100, w 120, d 60 mm. (Battery compartment and mains-plug transformer is not incl.) Size: 12cm x 10cm x 5,7cm. Learn More
    €169.63
    incl. VAT plus Shipping

  2. DUMMY watch winder module MTE WTM

    DUMMY watch winder module MTE WTM

    This is a watch winder module dummy MTE WTM for installation in a watch winder box, furniture or safes for additional storage hand winding watches or quartz watches. Delivery without cushion (additional accessory). Learn More
    €49.56
    incl. VAT plus Shipping

  3. thumbnail

    WTA watch winder assembly set

    WTA assembly set is a watch winder module. This module is equipped with the new drive. Preferred mounting position: 12° backwards. Holding position for the watch is in the centre over shaft Ø 5 mm. Dowel pin Ø 3 mm. Cable set switch / electrical bed plate, power jack / battery clips soldered. Cycle: manual selection of direction, stop cycle about 65 seconds, Position of switch: Left -0- Right, Connected load: 3 V DC. Weight: 155 grams. Learn More
    €89.99
    incl. VAT plus Shipping

  4. thumbnail

    iXpresio POWER 2 DIY watch winder kit

    For watch collectors looking for something unique: the high-quality "plug and play" iXpresio POWER 2 DIY watch winder kit. It contains: a prefabricated mounting plate with two "silent" modules, each with their own interval motor with right, left and bidirectional rotations, programmable to 1248, 960 or 672 turns per day, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with the latest technology. Easy assembly for all in a watch-winder case, cabinet or safe. Dimensions: 390 x 141 x 103mm (lxhxd), cup diameter: 84mm. Learn More
    €179.99
    incl. VAT plus Shipping

  5. thumbnail

    iXpresio POWER 3 DIY watch winder kit

    For watch collectors looking for something unique: the high-quality "plug and play" iXpresio POWER 3 DIY watch winder kit. It contains: a prefabricated mounting plate with three "silent" modules, each with their own interval motor with right, left and bidirectional rotations, programmable to 1248, 960 or 672 turns per day, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with the latest technology. Easy assembly for all in a watch-winder case, cabinet or safe. Dimensions: 580 x 141 x 103mm (lxhxd), diameter: 84mm. Learn More
    €259.99
    incl. VAT plus Shipping

  6. Luxury watch winder DIY kit S1 LIFE STYLE

    Luxury watch winder DIY kit S1 LIFE STYLE

    Luxury watch winder DIY kit S1 LIFE STYLE for winding up to 4 automatic watches simultaneously. Delivery incl: • digital display • soft touch control board • circuit-board • remote control • 4 ultra quiet motors with pot and 4 adjustable cushion is suitable for watches with a strap or bracelet circumference of 17cm to 24cm • all cables • power adapter. Rotation can be set to clockwise, anti-clockwise or to alternate, turns per day: 650, 750, 850, 1000 or 1950. This DIY watch winder kit is perfect for installation in furniture or in a self-built watch winder housing. Dimensions: pott: 93-94mm (depth 120mm), control panel: 90x22mm, display: 60x22mm. Learn More
    €299.99
    incl. VAT plus Shipping

  7. thumbnail

    Watch winder kit MTE BASE 3 DIY

    For watch collectors looking for something unique: high quality MTE BASE 3 DIY watch winder kit. Includes 3 silent build in modules with flocking, each with its own motor and control unit, power adapter plus watch cushions incl.. Build your own high performance watch winder with German technology. Easy installation into watch winder housing, safe or cupboard. Learn More
    €569.76
    incl. VAT plus Shipping

  8. thumbnail

    Watch winder kit MTE BASE 6 DIY

    For watch collectors looking for something unique: high quality MTE BASE 6 DIY watch winder kit. Includes 6 silent build in modules with flocking, each with its own motor and control unit, power adapter plus watch cushions incl.. Build your own high performance watch winder with German technology. Easy installation into watch winder housing, safe or cupboard. Learn More
    €1,119.99
    incl. VAT plus Shipping

  9. thumbnail

    Watch winder kit MTE BASE 9 DIY

    For watch collectors looking for something unique: high quality MTE BASE 9 DIY watch winder kit. Includes 9 silent build in modules with flocking, each with its own motor and control unit, power adapter plus watch cushions incl.. Build your own high performance watch winder with German technology. Easy installation into watch winder housing, safe or cupboard. Learn More
    €1,629.99
    incl. VAT plus Shipping

  10. thumbnail

    MTE Professional 3 DIY watch winder kit

    For watch collectors looking for something unique: the high-quality "plug and play" MTE Professional 3 DIY watch winder kit. It contains: a prefabricated mounting plate with three "silent" modules with flocking, each with their own motor, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with German technology. Easy assembly for all in a watch-winder case, cabinet or safe. Learn More
    €749.99
    incl. VAT plus Shipping

  11. thumbnail

    MTE Professional 6 DIY watch winder kit

    For watch collectors looking for something unique: the high-quality "plug and play" MTE Professional 6 DIY watch winder kit. It contains: 2 prefabricated mounting plates each equipped with three "silent" modules with flocking, each with their own motor, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with German technology. Easy assembly for all in a watch-winder case, cabinet or safe. Learn More
    €1,399.99
    incl. VAT plus Shipping

  12. thumbnail

    MTE Professional 9 DIY watch winder kit

    For watch collectors looking for something unique: the high-quality "plug and play" MTE Professional 9 DIY watch winder kit. It contains: 3 prefabricated mounting plates each equipped with three "silent" modules with flocking, each with their own motor, supplied with a compatible power supply unit and watch cushions. Build your own high-performance watch winder with German technology. Easy assembly for all in a watch-winder case, cabinet or safe. Learn More
    €1,999.99
    incl. VAT plus Shipping

  13. thumbnail

    ORIGINTIMES V3 watch winder kit

    The modules of the renowned Bugatti watch winder represent the technical cutting edge. The high-quality "plug and play" ORIGINTIMES V3 watch winder kit: it contains one prefabricated mounting plate with three top-quality "silent" modules (including power supply unit and all connecting cables), ready for immediate assembly behind a timber, metal or leather-covered wall. Technical data: construction with the narrowest module diameter in the world as well as a high-performance engine and chrome-plated frames. The inside of the holding cup and the watch cushions are all made of real leather. Robust axle bearings to safely and smoothly rotate even the most difficult watches. The cup bearing is only mounted on double ball bearings on one axis of rotation, ensuring frictionless and extremely quiet operation. A slipping clutch on a belt drive prevents gearbox damage through manual rotation and stopping. Maintenance-free, durable drive unit. Electronic control for precise movement cycles. A retro-reflective sensor ensures exact stopping for the cup, and also ensures that the watch is always in the same position. Learn More
    €1,799.99
    incl. VAT plus Shipping

  14. thumbnail

    ORIGINTIMES V6 watch winder kit

    The modules of the renowned Bugatti watch winder represent the technical cutting edge. The high-quality "plug and play" ORIGINTIMES V6 watch winder kit: it contains two prefabricated mounting plates each equipped with three top-quality "silent" modules (including power supply unit and all connecting cables), ready for immediate assembly behind a timber, metal or leather-covered wall. Technical data: construction with the narrowest module diameter in the world as well as a high-performance engine and chrome-plated frames. The inside of the holding cup and the watch cushions are all made of real leather. Robust axle bearings to safely and smoothly rotate even the most difficult watches. The cup bearing is only mounted on double ball bearings on one axis of rotation, ensuring frictionless and extremely quiet operation. A slipping clutch on a belt drive prevents gearbox damage through manual rotation and stopping. Maintenance-free, durable drive unit. Electronic control for precise movement cycles. A retro-reflective sensor ensures exact stopping for the cup, and also ensures that the watch is always in the same position. Learn More
    €3,599.99
    incl. VAT plus Shipping

  15. thumbnail

    ORIGINTIMES V9 watch winder kit

    The modules of the renowned Bugatti watch winder represent the technical cutting edge. The high-quality "plug and play" ORIGINTIMES V9 watch winder kit: it contains three prefabricated mounting plates each equipped with three top-quality "silent" modules (including power supply unit and all connecting cables), ready for immediate assembly behind a timber, metal or leather-covered wall. Technical data: construction with the narrowest module diameter in the world as well as a high-performance engine and chrome-plated frames. The inside of the holding cup and the watch cushions are all made of real leather. Robust axle bearings to safely and smoothly rotate even the most difficult watches. The cup bearing is only mounted on double ball bearings on one axis of rotation, ensuring frictionless and extremely quiet operation. A slipping clutch on a belt drive prevents gearbox damage through manual rotation and stopping. Maintenance-free, durable drive unit. Electronic control for precise movement cycles. A retro-reflective sensor ensures exact stopping for the cup, and also ensures that the watch is always in the same position. Learn More
    €5,299.99
    incl. VAT plus Shipping

  16. thumbnail

    Complete rotary switch for MTE WTM Modul

    Complete rotary switch for the MTE WTM SILENT watch winding module: On/Off-switch, right, left and both incl. AC adapter connection. Learn More
    €45.87
    incl. VAT plus Shipping

  17. Control-Unit with LED for MTE WTM watch winder modules

    Control-Unit with LED for MTE WTM watch winder modules

    Control-Unit with LED-Signal for MTE WTM and WTR watch winder modules. Options 1: TPD approx. 650 / 850 / 950 rotations within 12 hours (+12 hours off-time). Options 2: off / left rotation / right rotation / reversing rotation (alternating left rotation and right rotation). Options 3: express winding (continuous rotation without interruption). Learn More
    €79.99
    incl. VAT plus Shipping

  18. thumbnail

    MTE battery holder

    MTE battery holder for watch winder modules WTM or WTA. Learn More
    €4.99
    incl. VAT plus Shipping

  19. thumbnail

    MTE watch retaining cushion WTM modul

    MTE watch retaining cushion for WTM modul, black velvet, high quality - made in germany. Learn More
    €9.99
    incl. VAT plus Shipping

  20. thumbnail

    MTE power adapter

    MTE power adapter for WTM or WTA Modul, 100-240V. Learn More
    €18.50
    incl. VAT plus Shipping

  21. thumbnail

    Replacement motor for watch winder MTE WTS 4 230V

    Replacement motor for watch winder MTE WTS 4 220-240 V. Learn More
    €87.50
    incl. VAT plus Shipping

  22. thumbnail

    MTE double metal spring WTA/WTB

    MTE double-metal-spring for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series). Learn More
    €29.99
    incl. VAT plus Shipping

  23. thumbnail

    MTE double metal spring WTA/WTB black

    MTE double-metal-spring black coated for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series). Learn More
    €29.99
    incl. VAT plus Shipping

  24. thumbnail

    MTE WTA/WTB double spring, clear

    MTE double-spring, transparent with black base for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series). Learn More
    €29.99
    incl. VAT plus Shipping

  25. thumbnail

    MTE SMALL double metal spring WTA/WTB

    MTE SMALL double-metal-spring black for ladies-watches or watches with short strap, coated for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series). Learn More
    €32.17
    incl. VAT plus Shipping

  26. thumbnail

    MTE single metal spring WTA/WTB

    MTE single-metal-spring for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series). Learn More
    €18.99
    incl. VAT plus Shipping

  27. thumbnail

    MTE single metal spring WTA/WTB black

    MTE single-metal-spring black coated for MTE Modul WTA (also suitably for watch winders of the WTA and WTB series). Learn More
    €18.99
    incl. VAT plus Shipping

  28. thumbnail

    MTE watch holder WTA for watches without straps

    MTE watch holder WTA for two watches without straps. For all watch winder from the WTA and WTB Series. Learn More
    €69.99
    incl. VAT plus Shipping

  29. thumbnail

    MTE metal spring for WTS 4 series

    MTE metal spring for WTS 4 series. Learn More
    €19.99
    incl. VAT plus Shipping

  30. thumbnail

    MTE black metal spring for WTS 4 series

    MTE metal spring, black color, for WTS 4 series. Learn More
    €22.83
    incl. VAT plus Shipping

  31. thumbnail

    MTE golden metal spring for WTS 4 series

    MTE metal spring, 24k gold plated, for WTS 4 series. Learn More
    €35.96
    incl. VAT plus Shipping

  32. thumbnail

    MTE spring for WTS 4 series, clear

    MTE spring, transparent, for WTS 4 series. Learn More
    €19.99
    incl. VAT plus Shipping

  33. thumbnail

    MTE rubber coated metal spring for WTS 4 series

    MTE black rubber coated metal spring, for WTS 4 series. Learn More
    €23.99
    incl. VAT plus Shipping

  34. thumbnail

    MTE SMALL black metal spring for WTS 4

    MTE SMALL metal spring for ladies-watches or watches with short strap, black color, for WTS 4 series. Learn More
    €19.99
    incl. VAT plus Shipping

  35. thumbnail

    MTE SMALL metal spring for WTS 4 XS-M

    MTE SMALL metal spring for ladies-watches or watches with short strap, for WTS 4 series. Learn More
    €23.81
    incl. VAT plus Shipping

  36. thumbnail

    MTE watch holder WTS 4 for watches without straps

    MTE watch holder WTS 4 for watches without straps. For all watch winder from the WTS 4 Series. Learn More
    €49.99
    incl. VAT plus Shipping

  37. thumbnail

    MTE rubber support plate

    MTE rubber support plate for all MTE springs. Learn More
    €4.29
    incl. VAT plus Shipping

  38. thumbnail

    MTE Gummiring für Spangen WTS 4 Serie

    MTE Gummi-Laufring / O-Ringe für Uhrenhaltespangen der WTS 4 Serie. Learn More
    €4.50
    incl. VAT plus Shipping

38 Item(s)

per page

Set Descending Direction


© 2003 - 2017 Michael Wucherpfennig, Uhrencenter24. All Rights Reserved.